- +36 30 552 4519
- info@schifferkft.com
- M-F: 8:00 - 16:00
Square shaped beam with four sides of straight, parallel, perpendicular, longitudinal saw-cut. Sound pith, sound knot accepted without restriction.
1000 – 2700 mm
R=3 mm or 45ᴼ
The product contains no bark, no sapwood. Knots must not be larger than 30 % of the diameter, decayed knots are allowed up to 3 cm. Plane curvature and space curvature according to the natural growth of the tree. Strong plane and space curvature are only acceptable if requested by the customer. The surface must not contain rot and face cracks. Minimal pith rot is permissible. Freshly sanded product without insect damage and fungus infection.
Naturally grown
Y-tree
Naturally grown:
1000–6000 mm
Y-tree:
3000–6000 mm
Cylindrical shaped posts. The wood can contain intergrown knots without limit up to 1/3 of the diameter. Plane and space curvature up to a maximum of 2 cm/linear meter.
The surface must not contain rot, face cracks and pith rot. The product is free from insect damage and fungus infection.
As standard, the ends of the posts are cut off at right angle and chamfered at 45°.
800–6000 mm
60–600 mm
Straight on four sides, parallel, perpendicular sanded elements with rectangular cross-section. Sound pith, sound knot accepted without restriction.
Length x Width x Thickness
Length x Width x Thickness
The goods do not contain bark or sapwood, the raw material is cut out from a large selection of sound forest wood. It contains intergrown knots, but no wood defects that reduce strength or flexibility. Sanded, sapwood-free.
Unedged on one side (roof element)
Unedged on both sides (fence)
Products with profile according to the customer’s needs. Plane and space curvature up to a maximum of 2 cm/linear meter. The surface must not contain rot, face cracks and pith rot. The product is free from insect damage and fungus infection. As standard, the ends of the boards are cut off at right angle and chamfered at 45°.
Planed elements with chamfered edges
Chamfered edges: R=3 mm, 45°
Length x Width x Thickness
The individual parts are glued together using the most modern length-bonding technique, so that the wood remains dimensionally stable and shape-retaining over the years.
Length x Width x Thickness
Chamfered edges: R=3 mm, 45°
New product, innovation in the Interreg V-A Hungary-Croatia Co-operation Programme 2014-2020; within the project of B LIGHT Scheme ROBINIA – Joint development of high quality outdoor Robinia pseudoacacia wood-based panels
The base material from sustainable and controlled central European forestry.
By cutting through the wood grain and by gluing together the short planed elements with small cross-sections in lengthwise and transverse direction we manufacture strainless, shape-retaining Acacia panels and poles by preserving the original resistant characteristics of the Acacia wood.
Expectation for OGA Wood: during strength tests the wood breaks more likely than the glued joints.
Outdoor furniture producers, architects, playground equipment producers, landscaping architects and for all users who require not only hard wood that is weather resistant but also shape-retaining.
Length x Width x Thickness
video source: www.ogawood.com
This webpage has been produced with the financial assistance of the European Union. The content of the webpage is the sole responsibility of Schiffer Ltd. and can under no circumstances be regarded as reflecting the position of the European Union and/or the Managing Authority.
2022 © All rights reserved! | Privacy Notice | Cookie Policy | Made with 
by Artwork Design Studio
